Federal Acquisition Regulation Header
linebar underlining the word Federal Acquisition Regulation

PART 19--SMALL BUSINESS PROGRAMS

Sec.
19.000Scope of part.
19.001Definitions.

Subpart 19.1--Size Standards
19.101Explanation of terms.
19.102Size standards.

Subpart 19.2--Policies
19.201General policy.
19.202Specific policies.
19.202-1Encouraging small business participation in acquisitions.
19.202-2Locating small business sources.
19.202-3Equal low bids.
19.202-4Solicitation.
19.202-5Data collection and reporting requirements.
19.202-6Determination of fair market price.

Subpart 19.3--Determination of Status as a Small Business, HUBZone Small Business, or Small Disadvantaged Business Concern
19.301Representation by the offeror.
19.302Protesting a small business representation.
19.303Determining standard industrial classification codes and size standards.
19.304Disadvantaged business status.
19.305Protesting a representation of disadvantaged business status.
19.306Protesting a firm's status as a HUBZone small business concern.
19.307Solicitation provisions.

Subpart 19.4--Cooperation with the Small Business Administration
19.401General.
19.402Small Business Administration procurement center representatives.
19.403Small Business Administration breakout procurement center representative.

Subpart 19.5--Set-Asides for Small Business
19.501General.
19.502Setting aside acquisitions.
19.502-1Requirements for setting aside acquisitions.
19.502-2Total small business set-asides.
19.502-3Partial set-asides.
19.502-4Methods of conducting set-asides.
19.502-5Insufficient causes for not setting aside an acquisition.
19.503Setting aside a class of acquisitions for small business.
19.504[Reserved]
19.505Rejecting Small Business Administration recommendations.
19.506Withdrawing or modifying small business set-asides.
19.507Automatic dissolution of a small business set-aside.
19.508Solicitation provisions and contract clauses.

Subpart 19.6--Certificates of Competency and Determinations of Responsibility
19.601General.
19.602Procedures.
19.602-1Referral.
19.602-2Issuing or denying a Certificate of Competency (COC).
19.602-3Resolving differences between the agency and the Small Business Administration.
19.602-4Awarding the contract.

Subpart 19.7--The Small Business Subcontracting Program
19.701Definition.
19.702Statutory requirements.
19.703Eligibility requirements for participating in the program.
19.704Subcontracting plan requirements.
19.705Responsibilities of the contracting officer under the subcontracting assistance program.
19.705-1General support of the program.
19.705-2Determining the need for a subcontracting plan.
19.705-3Preparing the solicitation.
19.705-4Reviewing the subcontracting plan.
19.705-5Awards involving subcontracting plans.
19.705-6Postaward responsibilities of the contracting officer.
19.705-7Liquidated damages.
19.706Responsibilities of the cognizant administrative contracting officer.
19.707The Small Business Administration's role in carrying out the program.
19.708Contract clauses.

Subpart 19.8--Contracting with the Small Business Administration (The 8(a) Program)
19.800General.
19.801[Reserved]
19.802Selecting concerns for the 8(a) program.
19.803Selecting acquisitions for the 8(a) program.
19.804Evaluation, offering, and acceptance.
19.804-1Agency evaluation.
19.804-2Agency offering.
19.804-3SBA acceptance.
19.804-4Repetitive acquisitions.
19.805Competitive 8(a).
19.805-1General.
19.805-2Procedures.
19.806Pricing the 8(a) contract.
19.807Estimating the fair market price.
19.808Contract negotiation.
19.808-1Sole source.
19.808-2Competitive.
19.809Preaward considerations.
19.810SBA appeals.
19.811Preparing the contracts.
19.811-1Sole source.
19.811-2Competitive.
19.811-3Contract clauses.
19.812Contract administration.

Subpart 19.9--Very Small Business Pilot Program
19.901General.
19.902Definition.
19.903Applicability.
19.904Procedures.
19.905Solicitation provision and contract clause.

Subpart 19.10--Small Business Competitiveness Demonstration Program
19.1001General.
19.1002Definition.
19.1003Purpose.
19.1004Participating agencies.
19.1005Applicability.
19.1006Procedures.
19.1007Solicitation provisions.

Subpart 19.11--Price Evaluation Adjustment for Small Disadvantaged Business Concerns
19.1101General.
19.1102Applicability.
19.1103Procedures.
19.1104Solicitation provisions and contract clauses.

Subpart 19.12--Small Disadvantaged Business Participation Program
19.1201General.
19.1202Evaluation factor or subfactor.
19.1202-1General.
19.1202-2Applicability.
19.1202-3Considerations in developing an evaluation factor or subfactor.
19.1202-4Procedures.
19.1203Incentive subcontracting with small disadvantaged business concerns.
19.1204Solicitation provisions and contract clauses.

Subpart 19.13--Historically Underutilized Business Zone (HUBZone) Program
19.1301General.
19.1302Applicability.
19.1303Status as a qualified HUBZone small business concern.
19.1304Exclusions.
19.1305HUBZone set-aside procedures.
19.1306HUBZone sole source awards.
19.1307Price evaluation preference for HUBZone small business concerns.
19.1308Contract clauses.

19.000 Scope of part.

(a) This part implements the acquisition-related sections of the Small Business Act (15 U.S.C. 631, et seq.), applicable sections of the Armed Services Procurement Act (10 U.S.C. 2302, et seq.), the Federal Property and Administrative Services Act (41 U.S.C. 252), section 7102 of the Federal Acquisition Streamlining Act of 1994 (Public Law 103-355), 10 U.S.C. 2323, and Executive Order 12138, May 18, 1979. It covers--

(1) The determination that a concern is eligible for participation in the programs identified in this part;

(2) The respective roles of executive agencies and the Small Business Administration (SBA) in implementing the programs;

(3) Setting acquisitions aside for exclusive competitive participation by small business concerns and HUBZone small business concerns, and sole source awards to HUBZone small business concerns;

(4) The certificate of competency program;

(5) The subcontracting assistance program;

(6) The "8(a)" program, under which agencies contract with the SBA for goods or services to be furnished under a subcontract by a small disadvantaged business concern;

(7) The use of women-owned small business concerns;

(8) The use of a price evaluation adjustment for small disadvantaged business concerns, and the use of a price evaluation preference for HUBZone small business concerns;

(9) The Small Disadvantaged Business Participation Program; and

(10) The Very Small Business Pilot Program.

(b) This part, except for Subpart 19.6, applies only inside the United States, its territories and possessions, Puerto Rico, the Trust Territory of the Pacific Islands, and the District of Columbia. Subpart 19.6 applies worldwide.

19.001 Definitions.

"Concern," as used in this part, means any business entity organized for profit (even if its ownership is in the hands of a nonprofit entity) with a place of business located in the United States and which makes a significant contribution to the U.S. economy through payment of taxes and/or use of American products, material and/or labor, etc. "Concern" includes but is not limited to an individual, partnership, corporation, joint venture, association, or cooperative. For the purpose of making affiliation findings (see 19.101) any business entity, whether organized for profit or not, and any foreign business entity, i.e., any entity located outside the United States, shall be included.

"Fair market price," as used in this part, means a price based on reasonable costs under normal competitive conditions and not on lowest possible cost (see 19.202-6).

"HUBZone" means a historically underutilized business zone, which is an area located within one or more qualified census tracts, qualified nonmetropolitan counties, or lands within the external boundaries of an Indian reservation.

"HUBZone small business concern" means a small business concern that appears on the List of Qualified HUBZone Small Business Concerns maintained by the SBA.

"Industry," as used in this part, means all concerns primarily engaged in similar lines of activity, as listed and described in the Standard Industrial Classification (SIC) Manual.

"Labor surplus area" means a geographical area identified by the Department of Labor in accordance with 20 CFR Part 654, Subpart A, as an area of concentrated unemployment or underemployment or an area of labor surplus.

"Labor surplus area concern" means a concern that together with its first-tier subcontractors will perform substantially in labor surplus areas. Performance is substantially in labor surplus areas if the costs incurred under the contract on account of manufacturing, production, or performance of appropriate services in labor surplus areas exceed 50 percent of the contract price.

"Nonmanufacturer rule" means that a contractor under a small business set-aside or 8(a) contract shall be a small business under the applicable size standard and shall provide either its own product or that of another domestic small business manufacturing or processing concern (see 13 CFR 121.406).

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on government contracts, and qualified as a small business under the criteria and size standards in 13 CFR Part 121 (see 19.102). Such a concern is "not dominant in its field of operation" when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consid-eration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

"Small disadvantaged business concern," as used in this part, means--

(1) For prime contractors (except for 52.212-3(c)(2) and 52.219-1(b)(2) for general statistical purposes and 52.212-3(c)(7)(ii), 52.219-22(b)(2), and 52.219-23(a) for joint ventures under the price evaluation adjustment for small disadvantaged business concerns), an offeror that represents, as part of its offer, that it is a small business under the size standard applicable to the acquisition; and either--

(i) It has received certification as a small disadvantaged business concern consistent with 13 CFR part 124, subpart B; and

(A) No material change in disadvantaged ownership and control has occurred since its certification;

(B) Where the concern is owned by one or more disadvantaged individuals, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(C) It is listed, on the date of its representation, on the register of small disadvantaged business concerns maintained by the Small Business Administration; or

(ii) It has submitted a completed application to the Small Business Administration or a private certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR part 124, subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. In this case, a contractor must receive certification as an SDB by the SBA prior to contract award.

(2) For subcontractors, an offeror that represents, as part of its offer, that it is a small business under the size standard applicable to the acquisition and that it meets the definition of a small disadvantaged business in 13 CFR 124.1002.

"Very small business concern" means a small business concern--

(1) Whose headquarters is located within the geographic area served by a designated SBA district; and

(2) Which, together with its affiliates, has no more than 15 employees and has average annual receipts that do not exceed $1 million.

"Women-owned small business concern" means a small business concern--

(a) Which is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(b) Whose management and daily business operations are controlled by one or more women.

Subpart 19.1--Size Standards

19.101 Explanation of terms.

"Affiliates." As used in this subpart, business concerns are affiliates of each other if, directly or indirectly, either one controls or has the power to control the other, or another concern controls or has the power to control both. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships; provided, that restraints imposed by a franchise agreement are not considered in determining whether the franchisor controls or has the power to control the franchisee, if the franchisee has the right to profit from its effort, commensurate with ownership, and bears the risk of loss or failure. Any business entity may be found to be an affiliate, whether or not it is organized for profit or located inside the United States.

(a) Nature of control. Every business concern is considered as having one or more parties who directly or indirectly control or have the power to control it. Control may be affirmative or negative and it is immaterial whether it is exercised so long as the power to control exists.

(b) Meaning of "party or parties." The term "party" or "parties" includes, but is not limited to, two or more persons with an identity of interest such as members of the same family or persons with common investments in more than one concern. In determining who controls or has the power to control a concern, persons with an identity of interest may be treated as though they were one person.

(c) Control through stock ownership. (1) A party is considered to control or have the power to control a concern, if the party controls or has the power to control 50 percent or more of the concern's voting stock.

(2) A party is considered to control or have the power to control a concern, even though the party owns, controls, or has the power to control less than 50 percent of the concern's voting stock, if the block of stock the party owns, controls, or has the power to control is large, as compared with any other outstanding block of stock. If two or more parties each owns, controls, or has the power to control, less than 50 percent of the voting stock of a concern, and such minority block is equal or substantially equal in size, and large as compared with any other block outstanding, there is a presumption that each such party controls or has the power to control such concern; however, such presumption may be rebutted by a showing that such control or power to control, in fact, does not exist.

(3) If a concern's voting stock is distributed other than as described above, its management (officers and directors) is deemed to be in control of such concern.

(d) Stock options and convertible debentures. Stock options and convertible debentures exercisable at the time or within a relatively short time after a size determination and agreements to merge in the future, are considered as having a present effect on the power to control the concern. Therefore, in making a size determination, such options, debentures, and agreements are treated as though the rights held thereunder had been exercised.

(e) Voting trusts. If the purpose of a voting trust, or similar agreement, is to separate voting power from beneficial ownership of voting stock for the purpose of shifting control of or the power to control a concern in order that such concern or another concern may qualify as a small business within the size regulations, such voting trust shall not be considered valid for this purpose regardless of whether it is or is not valid within the appropriate jurisdiction. However, if a voting trust is entered into for a legitimate purpose other than that described above, and it is valid within the appropriate jurisdiction, it may be considered valid for the purpose of a size determination, provided such consideration is determined to be in the best interest of the small business program.

(f) Control through common management. A concern may be found as controlling or having the power to control another concern when one or more of the following circumstances are found to exist, and it is reasonable to conclude that under the circumstances, such concern is directing or influencing, or has the power to direct or influence, the operation of such other concern.

(1) Interlocking management. Officers, directors, employees, or principal stockholders of one concern serve as a working majority of the board of directors or officers of another concern.

(2) Common facilities. One concern shares common office space and/or employees and/or other facilities with another concern, particularly where such concerns are in the same or related industry or field of operation, or where such concerns were formerly affiliated.

(3) Newly organized concern. Former officers, directors, principal stockholders, and/or key employees of one concern organize a new concern in the same or a related industry or field operation, and serve as its officers, directors, principal stockholders, and/or key employees, and one concern is furnishing or will furnish the other concern with subcontracts, financial or technical assistance, and/or facilities, whether for a fee or otherwise.

(g) Control through contractual relationships--(1) Definition of a joint venture for size determination purposes. A joint venture for size determination purposes is an association of persons and/or concerns with interests in any degree or proportion by way of contract, express or implied, consorting to engage in and carry out a single specific business venture for joint profit, for which purpose they combine their efforts, property, money, skill, or knowledge, but not on a continuing or permanent basis for conducting business generally. A joint venture is viewed as a business entity in determining power to control its management.

(2) Joint venture--procurement and property sale assistance--Concerns bidding on a particular procurement or property sale as joint ventures are considered as affiliated and controlling or having the power to control each other with regard to performance of the contract. Moreover, an ostensible subcontractor which is to perform primary or vital requirements of a contract may have a controlling role such to be considered a joint venturer affiliated on the contract with the prime contractor. A joint venture affiliation finding is limited to particular contracts unless the SBA size determination finds general affiliation between the parties.

(3) Where a concern is not considered as being an affiliate of a concern with which it is participating in a joint venture, it is necessary, nevertheless, in computing annual receipts, etc., for the purpose of applying size standards, to include such concern's share of the joint venture receipts (as distinguished from its share of the profits of such venture).

(4) Franchise and license agreements. If a concern operates or is to operate under a franchise (or a license) agreement, the following policy is applicable: In determining whether the franchisor controls or has the power to control and, therefore, is affiliated with the franchisee, the restraints imposed on a franchisee by its franchise agreement shall not be considered, provided that the franchisee has the right to profit from its effort and the risk of loss or failure, commensurate with ownership. Even though a franchisee may not be controlled by the franchisor by virtue of the contractual relationship between them, the franchisee may be controlled by the franchisor or others through common ownership or common management, in which case they would be considered as affiliated.

"Annual receipts." (a) Annual receipts of a concern which has been in business for 3 or more complete fiscal years means the annual average gross revenue of the concern taken for the last 3 fiscal years. For the purpose of this definition, gross revenue of the concern includes revenues from sales of products and services, interest, rents, fees, commissions and/or whatever other sources derived, but less returns and allowances, sales of fixed assets, interaffiliate transactions between a concern and its domestic and foreign affiliates, and taxes collected for remittance (and if due, remitted) to a third party. Such revenues shall be measured as entered on the regular books of account of the concern whether on a cash, accrual, or other basis of accounting acceptable to the U.S. Treasury Department for the purpose of supporting Federal income tax returns, except when a change in accounting method from cash to accrual or accrual to cash has taken place during such 3-year period, or when the completed contract method has been used.

(1) In any case of change in accounting method from cash to accrual or accrual to cash, revenues for such 3-year period shall, prior to the calculation of the annual average, be restated to the accrual method. In any case, where the completed contract method has been used to account for revenues in such 3-year period, revenues must be restated on an accrual basis using the percentage of completion method.

(2) In the case of a concern which does not keep regular books of accounts, but which is subject to U.S. Federal income taxation, "annual receipts" shall be measured as reported, or to be reported to the U.S. Treasury Department, Internal Revenue Service, for Federal income tax purposes, except that any return based on a change in accounting method or on the completed contract method of accounting must be restated as provided for in the preceding paragraphs.

(b) Annual receipts of a concern that has been in business for less than 3 complete fiscal years means its total receipts for the period it has been in business, divided by the number of weeks including fractions of a week that it has been in business, and multiplied by 52. In calculating total receipts, the definitions and adjustments related to a change of accounting method and the completed contract method of paragraph (a) of this section, are applicable.

"Number of employees" is a measure of the average employment of a business concern and means its average employment, including the employees of its domestic and foreign affiliates, based on the number of persons employed on a full-time, part-time, temporary, or other basis during each of the pay periods of the preceding 12 months. If a business has not been in existence for 12 months, "number of employees" means the average employment of such concern and its affiliates during the period that such concern has been in existence based on the number of persons employed during each of the pay periods of the period that such concern has been in business. If a business has acquired an affiliate during the applicable 12-month period, it is necessary, in computing the applicant's number of employees, to include the affiliate's number of employees during the entire period, rather than only its employees during the period in which it has been an affiliate. The employees of a former affiliate are not included, even if such concern had been an affiliate during a portion of the period.

19.102 Size standards.

(a) The SBA establishes small business size standards on an industry-by-industry basis. (See 13 CFR 121.)

(b) Small business size standards are applied by--

(1) Classifying the product or service being acquired in the industry whose definition, as found in the Standard Industrial Classification (SIC) Manual, best describes the principal nature of the product or service being acquired;

(2) Identifying the size standard SBA established for that industry; and

(3) Specifying the size standard in the solicitation so that offerors can appropriately represent themselves as small or large.

(c) For size standard purposes, a product or service shall be classified in only one industry, whose definition best describes the principal nature of the product or service being acquired even though for other purposes it could be classified in more than one.

(d) When acquiring a product or service that could be classified in two or more industries with different size standards, contracting officers shall apply the size standard for the industry accounting for the greatest percentage of the contract price.

(e) If a solicitation calls for more than one item and allows offers to be submitted on any or all of the items, an offeror must meet the size standard for each item it offers to furnish. If a solicitation calling for more than one item requires offers on all or none of the items, an offeror may qualify as a small business by meeting the size standard for the item accounting for the greatest percentage of the total contract price.

(f) Any concern which submits a bid or offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is deemed to be a small business when it has no more than 500 employees, and--

(1) Except as provided in subparagraphs (f)(4) through (f)(7) of this section, in the case of Government acquisitions set-aside for small businesses, such nonmanufacturer must furnish in the performance of the contract, the product of a small business manufacturer or producer, which end product must be manufactured or produced in the United States. The term "nonmanufacturer" includes a concern which can manufacture or produce the product referred to in the specific acquisition but does not do so in connection with that acquisition. For size determination purposes there can be only one manufacturer of the end item being procured. The manufacturer of the end item being acquired is the concern which, with its own forces, transforms inorganic or organic substances including raw materials and/or miscellaneous parts or components into such end item. However, see the limitations on subcontracting at 52.219-14 which apply to any small business offeror other than a nonmanufacturer for purposes of set-asides and 8(a) awards.

(2) A concern which purchases items and packages them into a kit is considered to be a nonmanufacturer small business and can qualify as such for a given acquisition if it meets the size qualifications of a small nonmanufacturer for the acquisition, and if more than 50 percent of the total value of the kit and its contents is accounted for by items manufactured by small business.

(3) For the purpose of receiving a Certificate of Competency on an unrestricted acquisition, a small business nonmanufacturer may furnish any domestically produced or manufactured product.

(4) In the case of acquisitions set aside for small business or awarded under section 8(a) of the Small Business Act, when the acquisition is for a specific product (or a product in a class of products) for which the SBA has determined that there are no small business manufacturers or processors in the Federal market, then the SBA may grant a class waiver so that a nonmanufacturer does not have to furnish the product of a small business. For the most current listing of classes for which SBA has granted a waiver, contact an SBA Office of Government Contracting. A listing is also available on SBA's Internet Homepage at http://www.sba.gov/gc. Contracting officers may request that the SBA waive the nonmanufacturer rule for a particular class of products.

(5) For a specific solicitation, a contracting officer may request a waiver of that part of the nonmanufacturer rule which requires that the actual manufacturer or processor be a small business concern if no known domestic small business manufacturers or processors can reasonably be expected to offer a product meeting the requirements of the solicitation.

(6) Requests for waivers shall be sent to the--

Associate Administrator for Government Contracting

United States Small Business Administration

Mail Code 6250

409 Third Street, SW

Washington, DC 20416.

(7) The SBA provides for an exception to the nonmanufacturer rule where the procurement of a manufactured item processed under the procedures set forth in Part 13 is set aside for small business and where the anticipated cost of the procurement will not exceed $25,000. In those procurements, the offeror need not supply the end product of a small business concern as long as the product acquired is manufactured or produced in the United States.

(g) In the case of acquisitions set aside for very small business in accordance with 19.904, offerors may not have more than 15 employees and may not have average annual receipts that exceed $1 million.

(h) The industry size standards are set forth in the following table. The table column labeled "SIC" follows the standard industrial classification code as published by the Government in the Standard Industrial Classification Manual. The Manual is intended to cover the entire field of economic activities. It classifies and defines activities by industry categories and is the source used by SBA as a guide in defining industries for size standards. The number of employees or annual receipts indicates the maximum allowed for a concern, including its affiliates, to be considered small.

 

SICDescriptionSize
DIVISION A--AGRICULTURE, FORESTRY AND FISHING
Major Group 01--Agricultural Production--Crops
0111Wheat$0.5
0112Rice$0.5
0115Corn$0.5
0116Soybeans$0.5
0119Cash Grains, N.E.C.$0.5
0131Cotton$0.5
0132Tobacco$0.5
0133Sugarcane and Sugar Beets$0.5
0134Irish Potatoes$0.5
0139Field Crops, Except Cash Grains,
N.E.C.$0.5
0161Vegetables and Melons$0.5
0171Berry Crops$0.5
0172Grapes$0.5
0173Tree Nuts$0.5
0174Citrus Fruits$0.5
0175Deciduous Tree Fruits$0.5
0179Fruits and Tree Nuts, N.E.C.$0.5
0181Ornamental Floriculture Nursery
Products$0.5
0182Food Crops Grown Under Cover$0.5
0191General Farms, Primarily Crop$0.5
Major Group 02--Livestock and Animal Specialties
0211Beef Cattle Feedlots (Custom)$1.5
0212Beef Cattle, Except Feedlots$0.5
0213Hogs$0.5
0214Sheep and Goats$0.5
0219General Livestock, Except Dairy and
Poultry$0.5
0241Dairy Farms$0.5
0251Broiler, Fryer, and Roaster Chickens$0.5
0252Chicken Eggs$9.0
0253Turkeys and Turkey Eggs$0.5
0254Poultry Hatcheries$0.5
0259Poultry and Eggs, N.E.C.$0.5
0271Fur-Bearing Animals and Rabbits$0.5
0272Horses and Other Equines$0.5
0273Animal Aquaculture$0.5
0279Animal Specialties, N.E.C.$0.5
0291General Farms, Primarily Livestock
and Animal Specialties$0.5
Major Group 07--Agricultural Services
0711Soil Preparation Services$5.0
0721Crop Planting, Cultivating, and
Protecting$5.0
0722Crop Harvesting, Primarily by
Machine$5.0
0723Crop Preparation Service for Market,
Except Cotton Ginning$5.0
0724Cotton Ginning$5.0
0741Veterinary Services for Livestock$5.0
0742Veterinary Services for Animal
Specialties$5.0
0751Livestock Services, Except Veterinary$5.0
0752Animal Specialty Services, Except
Veterinary$5.0
0761Farm Labor Contractors and Crew
Leaders$5.0
0762Farm Management Services$5.0
0781Landscape Counseling and Planning$5.0
0782Lawn and Garden Services$5.0
Major Group 08--Forestry
0811Timber Tracts$5.0
0831Forest Nurseries and Gathering of
Forest Products$5.0
0851Forestry Services$5.0
Major Group 09--Fishing, Hunting, and Trapping
0912Finfish$3.0
0913Shellfish$3.0
0919Miscellaneous Marine Products$3.0
0921Fish Hatcheries and Preserves$3.0
0971Hunting and Trapping, and Game
Propagation$3.0
DIVISION B--MINING
Major Group 10--Metal Mining
1011Iron Ores500
1021Copper Ores500
1031Lead and Zinc Ores500
1041Gold Ores500
1044Silver Ores500
1061Ferroalloy Ores, Except Vanadium500
1081Metal Mining Services$5.0
1094Uranium-Radium-Vanadium Ores500
1099Miscellaneous Metal Ores, N.E.C.500
Major Group 12--Coal Mining
1221Bituminous Coal and Lignite Surface
Mining500
1222Bituminous Coal Underground Mining500
1231Anthracite Mining500
1241Coal Mining Services$5.0
Major Group 13--Oil and Gas Extraction
1311Crude Petroleum and Natural Gas500
1321Natural Gas Liquids500
1381Drilling Oil and Gas Wells500
1382Oil and Gas Field Exploration Services $5.0
1389Oil and Gas Field Services, N.E.C.$5.0
Major Group 14--Mining and Quarrying of Nonmetallic Minerals, Except Fuels
1411Dimension Stone500
1422Crushed and Broken Limestone500
1423Crushed and Broken Granite500
1429Crushed and Broken Stone, N.E.C.500
1442Construction Sand and Gravel500
1446Industrial Sand500
1455Kaolin and Ball Clay500
1459Clay, Ceramic, and Refractory Minerals,
N.E.C.500
1474Potash, Soda, and Borate Minerals500
1475Phosphate Rock500
1479Chemical and Fertilizer Mineral Mining,
N.E.C.500
1481Nonmetallic Minerals Services, Except
Fuels$5.0
1499Miscellaneous Nonmetallic Minerals,
Except Fuels500
DIVISION C--CONSTRUCTION
Major Group 15--Building Construction--General Contractors and Operative Builders
1521General Contractors--Single-Family
Houses$17.0
1522General Contractors--Residential
Buildings, Other Than Single-
Family$17.0
1531Operative Builders$17.0
1541General Contractors--Industrial
Buildings and Warehouses$17.0
1542General Contractors--Nonresidential
Buildings, Other Than Industrial
Buildings and Warehouses$17.0
Major Group 16--Heavy Construction Other Than Building Construction--Contractors
1611Highway and Street Construction, Except
Elevated Highways$17.0
1622Bridge, Tunnel, and Elevated Highway Construction
$17.0
1623Water, Sewer, Pipeline, and
Communicationsb and Power Line Construction
$17.0
1629Heavy Construction, N.E.C.$17.0
Except, Dredging and Surface Cleanup
Activities $13.51
Major Group 17--Construction--Special Trade Contractors
1711Plumbing, Heating, and Air-Conditioning$7.0
1721Painting and Paper Hanging$7.0
1731Electrical Work$7.0
1741Masonry, Stone Setting, and Other Stone
Work$7.0
1742Plastering, Drywall, Acoustical and
Insulation Work$7.0
1743Terrazzo, Tile, Marble, and Mosaic
Work$7.0
1751Carpentry Work$7.0
1752Floor Laying and Other Floor Work,
N.E.C. $7.0
1761Roofing, Siding, and Sheet Metal Work $7.0
1771Concrete Work$7.0
1781Water Well Drilling$7.0
1791Structural Steel Erection$7.0
1793Glass and Glazing Work$7.0
1794Excavation Work$7.0
1795Wrecking and Demolition Work $7.0
1796Installation or Erection of Building
Equipment, N.E.C.$7.0
1799Special Trade Contractors, N.E.C.$7.0
Except, Base Housing Maintenance$7.012
DIVISION D--MANUFACTURING2
Major Group 20--Food and Kindred Products
2011Meat Packing Plants500
2013Sausages and Other Prepared Meat
Products500
2015Poultry Slaughtering and Processing500
2021Creamery Butter500
2022Natural, Processed, and Imitation
Cheese500
2023Dry, Condensed, and Evaporated Dairy
Products500
2024Ice Cream and Frozen Desserts500
2026Fluid Milk500
2032Canned Specialties1,000
2033Canned Fruits, Vegetables, Preserves,
Jams, and Jellies5003
2034Dried and Dehydrated Fruits, Vegetables,
and Soup Mixes500
2035Pickled Fruits and Vegetables, Vegetable
Sauces and Seasonings, and Salad
Dressings500
2037Frozen Fruits, Fruit Juices, and
Vegetables500
2038Frozen Specialties, N.E.C.500
2041Flour and Other Grain Mill Products500
2043Cereal Breakfast Foods1,000
2044Rice Milling500
2045Prepared Flour Mixes and Doughs500
2046Wet Corn Milling750
2047Dog and Cat Food500
2048Prepared Feeds and Feed Ingredients for
Animals and Fowls, Except Dogs and
Cats500
2051Bread and Other Bakery Products,
Except Cookies and Crackers500
2052Cookies and Crackers750
2053Frozen Bakery Products, Except Bread500
2061Cane Sugar, Except Refining500
2062Cane Sugar Refining750
2063Beet Sugar750
2064Candy and Other Confectionery
Products500
2066Chocolate and Cocoa Products500
2067Chewing Gum500
2068Salted and Roasted Nuts and Seeds500
2074Cottonseed Oil Mills500
2075Soybean Oil Mills500

2076Vegetable Oil Mills, Except Corn, Cottonseed, and Soybean1,000 2077Animal and Marine Fats and Oils500 2079Shortening, Table Oils, Margarine, and Other Edible Fats and Oils, N.E.C.750 2082Malt Beverages500 2083Malt500 2084Wines, Brandy, and Brandy Spirits500 2085Distilled and Blended Liquors750 2086Bottled and Canned Soft Drinks and Carbonated Waters500 2087Flavoring Extracts and Flavoring Syrups, N.E.C.500 2091Canned and Cured Fish and Seafoods500 2092Prepared Fresh or Frozen Fish and Seafoods500 2095Roasted Coffee500 2096Potato Chips, Corn Chips, and Similar Snacks500 2097Manufactured Ice500 2098Macaroni, Spaghetti, Vermicelli, and Noodles500 2099Food Preparations, N.E.C.500

Major Group 21--Tobacco Products 2111Cigarettes1,000 2121Cigars500 2131Chewing and Smoking Tobacco and Snuff500 2141Tobacco Stemming and Redrying500

Major Group 22--Textile Mill Products 2211Broadwoven Fabric Mills, Cotton1,000 2221Broadwoven Fabric Mills, Manmade Fiber and Silk500 2231Broadwoven Fabric Mills, Wool (Including Dyeing and Finishing)500 2241Narrow Fabric and Other Smallwares Mills: Cotton, Wool, Silk and Manmade Fiber500 2251Women's Full-Length and Knee-Length Hosiery, Except Socks500 2252Hosiery, N.E.C.500 2253Knit Outerwear Mills500 2254Knit Underwear and Nightwear Mills500 2257Weft Knit Fabric Mills500 2258Lace and Warp Knit Fabric Mills500

2259Knitting Mills, N.E.C.500 2261Finishers of Broadwoven Fabrics of Cotton1,000 2262Finishers of Broadwoven Fabrics of Manmade Fiber and Silk500 2269Finishers of Textiles, N.E.C.500 2273Carpets and Rugs500 2281Yarn Spinning Mills500 2282Yarn Texturizing, Throwing, Twisting, and Winding Mills500 2284Thread Mills500 2295Coated Fabrics, Not Rubberized1,000 2296Tire Cord and Fabrics1,000 2297Nonwoven Fabrics500 2298Cordage and Twine500 2299Textile Goods, N.E.C.500

Major Group 23--Apparel and Other Finished Products Made From Fabrics and Similar Materials 2311Men's and Boys' Suits, Coats and Overcoats500 2321Men's and Boys' Shirts, Except Work Shirts500 2322Men's and Boys' Underwear and Nightwear500 2323Men's and Boys' Neckwear500 2325Men's and Boys' Separate Trousers and Slacks500 2326Men's and Boys' Work Clothing500 2329Men's and Boys' Clothing, N.E.C.500 2331Women's, Misses', and Juniors' Blouses and Shirts500 2335Women's, Misses', and Juniors' Dresses500 2337Women's, Misses', and Juniors' Suits, Skirts, and Coats500 2339Women's, Misses', and Juniors' Outerwear, N.E.C.500 2341Women's, Misses', Children's, and Infants' Underwear and Nightwear 500 2342Brassieres, Girdles, and Allied Garments500 2353Hats, Caps, and Millinery500 2361Girls', Children's, and Infants' Dresses, Blouses, and Shirts500 2369Girls', Children's, and Infants' Outerwear, N.E.C.500

2371Fur Goods500 2381Dress and Work Gloves, Except Knit and All-Leather500 2384Robes and Dressing Gowns500 2385Waterproof Outerwear500 2386Leather and Sheep-Lined Clothing500 2387Apparel Belts500 2389Apparel and Accessories, N.E.C.500 2391Curtains and Draperies500 2392House Furnishings, Except Curtains and Draperies500 2393Textile Bags500 2394Canvas and Related Products500 2395Pleating, Decorative and Novelty Stitching, and Tucking for the Trade500 2396Automotive Trimmings, Apparel Findings, and Related Products500 2397Schiffli Machine Embroideries500 2399Fabricated Textile Products, N.E.C.500

Major Group 24--Lumber and Wood Products, Except Furniture 2411Logging500 2421Sawmills and Planing Mills, General500 2426Hardwood Dimension and Flooring Mills500 2429Special Product Sawmills, N.E.C.500 2431Millwork500 2434Wood Kitchen Cabinets500 2435Hardwood Veneer and Plywood500 2436Softwood Veneer and Plywood500 2439Structural Wood Members, N.E.C.500 2441Nailed and Lock Corner Wood Boxes and Shook500 2448Wood Pallets and Skids500 2449Wood Containers, N.E.C.500 2451Mobile Homes500 2452Prefabricated Wood Buildings and Components500 2491Wood Preserving500 2493Reconstituted Wood Products500 2499Wood Products, N.E.C.500

Major Group 25--Furniture and Fixtures 2511Wood Household Furniture, Except Upholstered500

2512Wood Household Furniture, Upholstered500 2514Metal Household Furniture500 2515Mattresses, Foundations, and Convertible Beds500 2517Wood Television, Radio, Phonograph, and Sewing Machine Cabinets500 2519Household Furniture, N.E.C.500 2521Wood Office Furniture500 2522Office Furniture, Except Wood500 2531Public Building and Related Furniture500 2541Wood Office and Store Fixtures, Partitions, Shelving, and Lockers500 2542Office and Store Fixtures, Partitions, Shelving, and Lockers, Except Wood500 2591Drapery Hardware and Window Blinds and Shades500 2599Furniture and Fixtures, N.E.C.500

Major Group 26--Paper and Allied Products 2611Pulp Mills750 2621Paper Mills750 2631Paperboard Mills750 2652Setup Paperboard Boxes500 2653Corrugated and Solid Fiber Boxes500 2655Fiber Cans, Tubes, Drums, and Similar Products500 2656Sanitary Food Containers, Except Folding750 2657Folding Paperboard Boxes, Including Sanitary750 2671Packaging Paper and Plastics Film, Coated and Laminated500 2672Coated and Laminated Paper, N.E.C.500 2673Plastics, Foil, and Coated Paper Bags500 2674Uncoated Paper and Multiwall Bags500 2675Die-Cut Paper and Paperboard and Cardboard500 2676Sanitary Paper Products500 2677Envelopes500 2678Stationery, Tablets, and Related Products500 2679Converted Paper and Paperboard Products, N.E.C.500

Major Group 27--Printing, Publishing, and
Allied Industries
2711Newspapers: Publishing, or Publishing and Printing500 2721Periodicals: Publishing, or Publishing and Printing500 2731Books: Publishing, or Publishing and Printing500 2732Book Printing500 2741Miscellaneous Publishing500 2752Commercial Printing, Lithographic500 2754Commercial Printing, Gravure500 2759Commercial Printing, N.E.C.500 2761Manifold Business Forms500 2771Greeting Cards500 2782Blankbooks, Looseleaf Binders and Devices500 2789Bookbinding and Related Work500 2791Typesetting500 2796Platemaking and Related Services500

Major Group 28--Chemicals and Allied Products 2812Alkalies and Chlorine1,000 2813Industrial Gases1,000 2816Inorganic Pigments1,000 2819Industrial Inorganic Chemicals, N.E.C.1,000 2821Plastics Materials, Synthetic Resins, and Nonvulcanizable Elastomers750 2822Synthetic Rubber (Vulcanizable Elastomers)1,000 2823Cellulosic Manmade Fibers1,000 2824Manmade Organic Fibers, Except Cellulosic1,000 2833Medicinal Chemicals and Botanical Products750 2834Pharmaceutical Preparations750 2835In Vitro and In Vivo Diagnostic Substances500 2836Biological Products, Except Diagnostic Substances 500 2841Soap and Other Detergents, Except Specialty Cleaners750 2842Specialty Cleaning, Polishing, and Sanitation Preparations500 2843Surface Active Agents, Finishing Agents, Sulfonated Oils, and Assistants 500 2844Perfumes, Cosmetics, and Other Toilet Preparations 500 2851Paints, Varnishes, Lacquers, Enamels, and Allied Products500 2861Gum and Wood Chemicals500 2865Cyclic Organic Crudes and Intermediates, and Organic Dyes and Pigments750 2869Industrial Organic Chemicals, N.E.C.1,000 2873Nitrogenous Fertilizers1,000 2874Phosphatic Fertilizers500 2875Fertilizers, Mixing Only500 2879Pesticides and Agricultural Chemicals, N.E.C.500 2891Adhesives and Sealants500 2892Explosives750 2893Printing Ink500 2895Carbon Black500 2899Chemicals and Chemical Preparations, N.E.C.500

Major Group 29--Petroleum Refining and Related Industries 2911Petroleum Refining1,5004 2951Asphalt Paving Mixtures and Blocks500 2952Asphalt Felts and Coatings750 2992Lubricating Oils and Greases500 2999Products of Petroleum and Coal, N.E.C.500

Major Group 30--Rubber and Miscellaneous
Plastics Products
3011Tires and Inner Tubes1,0005 3021Rubber and Plastics Footwear1,000 3052Rubber and Plastics Hose and Belting500 3053Gaskets, Packing, and Sealing Devices500 3061Molded, Extruded, and Lathe-Cut Mechanical Rubber Goods500 3069Fabricated Rubber Products, N.E.C.500 3081Unsupported Plastics Film and Sheet500 3082Unsupported Plastics Profile Shapes500 3083Laminated Plastics Plate, Sheet, and Profile Shapes500 3084Plastics Pipe500 3085Plastics Bottles500 3086Plastics Foam Products500 3087Custom Compounding of Purchased Plastics Resins500 3088Plastics Plumbing Fixtures500 3089Plastics Products, N.E.C.500

Major Group 31--Leather and Leather Products 3111Leather Tanning and Finishing500 3131Boot and Shoe Cut Stock and Findings500 3142House Slippers500 3143Men's Footwear, Except Athletic500 3144Women's Footwear, Except Athletic500 3149Footwear, Except Rubber, N.E.C.500 3151Leather Gloves and Mittens500 3161Luggage500 3171Women's Handbags and Purses500 3172Personal Leather Goods, Except Women's Handbags and Purses500 3199Leather Goods, N.E.C.500

Major Group 32--Stone, Clay, Glass, and
Concrete Products
3211Flat Glass1,000 3221Glass Containers750 3229Pressed and Blown Glass and Glassware, N.E.C.750 3231Glass Products, Made of Purchased Glass500 3241Cement, Hydraulic750 3251Brick and Structural Clay Tile500 3253Ceramic Wall and Floor Tile500 3255Clay Refractories500 3259Structural Clay Products, N.E.C.500 3261Vitreous China Plumbing Fixtures and China and Earthenware Fittings and Bathroom Accessories750 3262Vitreous China Table and Kitchen Articles500 3263Fine Earthenware (Whiteware) Table and Kitchen Articles500 3264Porcelain Electrical Supplies500 3269Pottery Products, N.E.C.500 3271Concrete Block and Brick500 3272Concrete Products, Except Block and Brick500 3273Ready Mixed Concrete500 3274Lime500 3275Gypsum Products1,000 3281Cut Stone and Stone Products500

3291Abrasive Products500 3292Asbestos Products750 3295Minerals and Earths, Ground or Otherwise Treated500 3296Mineral Wool750 3297Nonclay Refractories750 3299Nonmetallic Mineral Products, N.E.C.500

Major Group 33--Primary Metal Industries 3312Steel Works, Blast Furnaces (Including Coke Ovens), and Rolling Mills1,000 3313Electrometallurgical Products, Except Steel750 3315Steel Wiredrawing and Steel Nails and Spikes1,000 3316Cold-Rolled Steel Sheet, Strip, and Bars1,000 3317Steel Pipe and Tubes1,000 3321Gray and Ductile Iron Foundries500 3322Malleable Iron Foundries500 3324Steel Investment Foundries500 3325Steel Foundries, N.E.C.500 3331Primary Smelting and Refining of Copper1,000 3334Primary Production of Aluminum1,000 3339Primary Smelting and Refining of Nonferrous Metals, Except Copper and Aluminum750 3341Secondary Smelting and Refining of Nonferrous Metals500 3351Rolling, Drawing, and Extruding of Copper750 3353Aluminum Sheet, Plate, and Foil750 3354Aluminum Extruded Products750 3355Aluminum Rolling and Drawing, N.E.C.750 3356Rolling, Drawing, and Extruding of Nonferrous Metals, Except Copper and Aluminum750 3357Drawing and Insulating of Nonferrous Wire1,000 3363Aluminum Die-Castings500 3364Nonferrous Die-Castings, Except Aluminum500 3365Aluminum Foundries500 3366Copper Foundries500 3369Nonferrous Foundries, Except Aluminum and Copper500 3398Metal Heat Treating750 3399Primary Metal Products, N.E.C.750

Major Group 34--Fabricated Metal Products, Except Machinery and Transportation Equipment 3411Metal Cans1,000 3412Metal Shipping Barrels, Drums, Kegs, and Pails500 3421Cutlery500 3423Hand and Edge Tools, Except Machine Tools and Handsaws500 3425Saw Blades and Handsaws500 3429Hardware, N.E.C.500 3431Enameled Iron and Metal Sanitary Ware750 3432Plumbing Fixture Fittings and Trim500 3433Heating Equipment, Except Electric and Warm Air Furnaces500 3441Fabricated Structural Metal500 3442Metal Doors, Sash, Frames, Molding, and Trim500 3443Fabricated Plate Work (Boiler Shops)500 3444Sheet Metal Work500 3446Architectural and Ornamental Metal Work500 3448Prefabricated Metal Buildings and Components500 3449Miscellaneous Structural Metal Work500 3451Screw Machine Products500 3452Bolts, Nuts, Screws, Rivets, and Washers500 3462Iron and Steel Forgings500 3463Nonferrous Forgings500 3465Automotive Stampings500 3466Crowns and Closures500 3469Metal Stampings, N.E.C.500 3471Electroplating, Plating, Polishing, Anodizing, and Coloring500 3479Coating, Engraving, and Allied Services, N.E.C.500 3482Small Arms Ammunition1,000 3483Ammunition, Except for Small Arms1,500 3484Small Arms1,000 3489Ordnance and Accessories, N.E.C.500 3491Industrial Valves500

3492Fluid Power Valves and Hose Fittings500 3493Steel Springs, Except Wire500 3494Valves and Pipe Fittings, N.E.C.500 3495Wire Springs500 3496Miscellaneous Fabricated Wire Products500 3497Metal Foil and Leaf500 3498Fabricated Pipe and Pipe Fittings500 3499Fabricated Metal Products, N.E.C.500

Major Group 35--Industrial and Commercial Machinery and Computer Equipment 3511Steam, Gas, and Hydraulic Turbines, and Turbine Generator Set Units1,000 3519Internal Combustion Engines, N.E.C.1,000 3523Farm Machinery and Equipment500 3524Lawn and Garden Tractors and Home Lawn and Garden Equipment500 3531Construction Machinery and Equipment750 3532Mining Machinery and Equipment, Except Oil and Gas Field Machinery and Equipment500 3533Oil and Gas Field Machinery and Equipment500 3534Elevators and Moving Stairways500 3535Conveyors and Conveying Equipment500 3536Overhead Traveling Cranes, Hoists, and Monorail Systems500 3537Industrial Trucks, Tractors, Trailers, and Stackers750 3541Machine Tools, Metal Cutting Types500 3542Machine Tools, Metal Forming Types500 3543Industrial Patterns500 3544Special Dies and Tools, Die Sets, Jigs and Fixtures, and Industrial Molds500 3545Cutting Tools, Machine Tool Accessories, and Machinists' Precision Measuring Devices500 3546Power-Driven Handtools500 3547Rolling Mill Machinery and Equipment500 3548Electric and Gas Welding and Soldering Equipment 500 3549Metalworking Machinery, N.E.C.500 3552Textile Machinery500 3553Woodworking Machinery500 3554Paper Industries Machinery500 3555Printing Trades Machinery and Equipment500 3556Food Products Machinery500 3559Special Industry Machinery, N.E.C.500 3561Pumps and Pumping Equipment500 3562Ball and Roller Bearings750 3563Air and Gas Compressors500 3564Industrial and Commercial Fans and Blowers and Air Purification Equipment500 3565Packaging Machinery500 3566Speed Changers, Industrial High-Speed Drives, and Gears500 3567Industrial Process Furnaces and Ovens500 3568Mechanical Power Transmission Equipment, N.E.C.500 3569General Industrial Machinery and Equipment, N.E.C.500 3571Electronic Computers1,000 3572Computer Storage Devices1,000 3575Computer Terminals1,000 3577Computer Peripheral Equipment, N.E.C.1,000 3578Calculating and Accounting Machines, Except Electronic Computers1,000 3579Office Machines, N.E.C.500 3581Automatic Vending Machines500 3582Commercial Laundry, Dry Cleaning, and Pressing Machines500 3585Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment750 3586Measuring and Dispensing Pumps500 3589Service Industry Machinery, N.E.C.500 3592Carburetors, Pistons, Piston Rings, and Valves500 3593Fluid Power Cylinders and Actuators500 3594Fluid Power Pumps and Motors500 3596 Scales and Balances, Except
Laboratory 500 3599Industrial and Commercial Machinery and Equipment, N.E.C.500

Major Group 36--Electronic and Other Electrical

Equipment and Components, Except Computer Equipment 3612Power, Distribution, and Specialty Transformers750 3613Switchgear and Switchboard Apparatus750 3621Motors and Generators1,000 3624Carbon and Graphite Products 750 3625Relays and Industrial Controls750 3629Electrical Industrial Apparatus, N.E.C.500 3631Household Cooking Equipment750 3632Household Refrigerators and Home and Farm Freezers1,000 3633Household Laundry Equipment1,000 3634Electric Housewares and Fans750 3635Household Vacuum Cleaners750 3639Household Appliances, N.E.C.500 3641Electric Lamp Bulbs and Tubes1,000 3643Current-Carrying Wiring Devices500 3644Noncurrent-Carrying Wiring Devices500 3645Residential Electric Lighting Fixtures500 3646Commercial, Industrial, and Institutional Electric Lighting Fixtures500 3647Vehicular Lighting Equipment500 3648Lighting Equipment, N.E.C.500 3651Household Audio and Video Equipment750 3652Phonograph Records and Prerecorded Audio Tapes and Disks750 3661Telephone and Telegraph Apparatus1,000 3663Radio and Television Broadcasting and Communications Equipment 750 3669Communications Equipment, N.E.C.750 3671Electron Tubes750 3672Printed Circuit Boards500 3674Semiconductors and Related Devices500 3675Electronic Capacitors500 3676Electronic Resistors500 3677Electronic Coils, Transformers, and Other Inductors500 3678Electronic Connectors500 3679Electronic Components, N.E.C.500 3691Storage Batteries500 3692Primary Batteries, Dry and Wet1,000 3694Electrical Equipment for Internal Combustion Engines750 3695Magnetic and Optical Recording Media 1,000 3699Electrical Machinery, Equipment, and Supplies, N.E.C.750

Major Group 37--Transportation Equipment 3711Motor Vehicles and Passenger Car Bodies1,000 3713Truck and Bus Bodies500 3714Motor Vehicle Parts and Accessories750 3715Truck Trailers500 3716Motor Homes1,000 3721Aircraft1,500 3724Aircraft Engines and Engine Parts1,000 3728Aircraft Parts and Auxiliary Equipment, N.E.C.1,0009 3731Shipbuilding and Repair of Nuclear Propelled Ships1,000 Except, Shipbuilding of Nonnuclear Propelled Ships and Nonpropelled Ships1,000 Ship Repair (Including Overhauls and Conversions) Performed on Nonnuclear Propelled and Nonpropelled Ships East of the 108 Meridian1,000 Ship Repair (Including Overhauls and Conversions) Performed on NonnuclearPropelled and Nonpropelled Ships West of the 108 Meridian1,000 3732Boat Building and Repairing500 3743Railroad Equipment1,000 3751Motorcycles, Bicycles, and Parts500 3761Guided Missiles and Space Vehicles1,000 3764Guided Missile and Space Vehicle Propulsion Units and Propulsion Unit Parts1,000 3769Guided Missile and Space Vehicle Parts and Auxiliary Equipment, N.E.C.1,000 3792Travel Trailers and Campers500 3795Tanks and Tank Components1,000 3799Transportation Equipment, N.E.C.500

Major Group 38--Measuring, Analyzing, and Controlling Instruments; Photographic, Medical, and Optical Goods; Watches and Clocks 3812Search, Detection, Navigation, Guidance, Aeronautical, and Nautical Systems and Instruments750 3821Laboratory Apparatus and Furniture500 3822Automatic Controls for Regulating Residential and Commercial Environments and Appliances500 3823Industrial Instruments for Measurement, Display, and Control of Process Variables; and Related Products500 3824Totalizing Fluid Meters and Counting Devices500 3825Instruments for Measuring and Testing of Electricity and Electrical Signals500 3826Laboratory Analytical Instruments500 3827Optical Instruments and Lenses500 3829Measuring and Controlling Devices, N.E.C.500 3841Surgical and Medical Instruments and Apparatus500 3842Orthopedic, Prosthetic, and Surgical Appliances and Supplies500 3843Dental Equipment and Supplies500 3844X-Ray Apparatus and Tubes and Related Irradiation Apparatus 500 3845Electromedical and Electrotherapeutic Apparatus500 3851Ophthalmic Goods500 3861Photographic Equipment and Supplies500 3873Watches, Clocks, Clockwork Operated Devices, and Parts500

Major Group 39--Miscellaneous Manufacturing Industries 3911Jewelry, Precious Metal500 3914Silverware, Plated Ware, and Stainless Steel Ware500 3915Jewelers' Findings and Materials, and Lapidary Work500 3931Musical Instruments500 3942Dolls and Stuffed Toys500 3944Games, Toys, and Children's Vehicles, Except Dolls and Bicycles500 3949Sporting and Athletic Goods, N.E.C.500 3951Pens, Mechanical Pencils, and Parts500 3952Lead Pencils, Crayons, and Artists' Materials500

3953Marking Devices500 3955Carbon Paper and Inked Ribbons500 3961Costume Jewelry and Costume Novelties, Except Precious Metal500 3965Fasteners, Buttons, Needles, and Pins500 3991Brooms and Brushes500 3993Signs and Advertising Specialties500 3995 Burial Caskets500 3996Linoleum, Asphalted-Felt-Base, and Other Hard Surface Floor Coverings, N.E.C.750 3999Manufacturing Industries, N.E.C.500

DIVISION E--TRANSPORTATION, COMMUNICATIONS, ELECTRIC, GAS AND SANITARY SERVICES

Major Group 40--Railroad Transportation 4011Railroads, Line-Haul Operating1,500 4013Railroad Switching and Terminal Establishments500

Major Group 41--Local and Suburban Transit and Interurban Highway Passenger Transportation 4111Local and Suburban Transit$5.0 4119Local Passenger Transportation, N.E.C.$5.0 4121Taxicabs$5.0 4131Intercity and Rural Bus Transportation$5.0 4141Local Bus Charter Service$5.0 4142Bus Charter Service, Except Local$5.0 4151School Buses$5.0 4173Terminal and Service Facilities for Motor Vehicle Passenger Transportation$5.0

Major Group 42--Motor Freight Transportation
and Warehousing
4212Local Trucking Without Storage$18.5 Except, Garbage and Refuse Collection, Without Disposal$6.0 4213Trucking, Except Local$18.5 4214Local Trucking With Storage$18.5 4215Courier Services, Except by Air$18.5 4221Farm Product Warehousing and Storage$18.5 4222Refrigerated Warehousing and Storage$18.5 4225General Warehousing and Storage$18.5 4226Special Warehousing and Storage, N.E.C.$18.5 4231Terminal and Joint Terminal Maintenance Facilities for Motor Freight Transportation$5.0

Major Group 44--Water Transportation 4412Deep Sea Foreign Transportation of Freight500 4424Deep Sea Domestic Transportation of Freight500 4432Freight Transportation on the Great Lakes -- St. Lawrence Seaway500 4449Water Transportation of Freight, N.E.C.500 4481Deep Sea Transportation of Passengers, Except by Ferry500 4482Ferries500 4489Water Transportation of Passengers, N.E.C.500 4491Marine Cargo Handling$18.5 4492Towing and Tugboat Services$5.0 4493Marinas$5.0 4499Water Transportation Services, N.E.C.$5.0 Except, Offshore Marine Water Transportation Services$20.5

Major Group 45--Transportation by Air 4512Air Transportation, Scheduled1,500 4513Air Courier Services1,500 4522Air Transportation, Nonscheduled1,500 Except, Offshore Marine Air Transportation Services$20.5 4581Airports, Flying Fields, and Airport Terminal Services$5.0

Major Group 46--Pipelines, Except Natural Gas 4612Crude Petroleum Pipelines1,500 4613Refined Petroleum Pipelines1,500 4619Pipelines, N.E.C.$25.0

Major Group 47--Transportation Services 4724Travel Agencies$1.06 4725Tour Operators$5.0